| Why
do bus manufacturers use |
|
|
Speedometers?
Quality! |
| Why
use Ametek/Dixson to replace all speedometers? |
| Quality: |
5yr/500,000 mile
warranty (500 series) |
|
|
| Black
bezel Pos. or neg. systems Non-adjustable For 2 pulses per tire
revolution & 480 tire revolutions per mile |
| P/N Kit 47908 12v |
P/N Kit 47241
24v |
(Kits
contain head, wire harness and
magnetic sensor) |
|
| Black bezel Pos.
or neg. systems Non-adjustable For 4 pulses per tire revolution &
480 tire revolutions per mile 24vdc only |
| P/Ns 48267 &
**49728 (Heads only) |
| **Single scale
(see below) |
| Note:
If a kit is needed, add a "K" after the p/n. |
|
|
|
| Lower Costs: |
|
|
|
- Less inventory - 1 head
for all front wheel and transmission signals. 1 head for ECM
signals.
- Accurate continuous
mileage - easily set the odometer on any new head to the correct
mileage. Monitor tire wear, fuel, service schedules, etc.
- Hubometer costs are
eliminated - obsolete for any powered unit.
- Lower initial costs.
|
|
| User
Friendly: |
Simple calibration
and trouble diagnosis |
AMP plug makes testing
and installation easy. |
Set correct mileage on 9
million mile
odometer & install seal. |
| 10 switch panel
allows accurate calibration |
|
|
|
| (700 Series) |
(700 Series) |
| Connect to
any OEM wire harness (choose appropriate PSI interface harness). Replace
any diameter head (choose appropriate PSI adapter plate). Scale plate
has either US or metric major scale with the other as the minor.
(Speedometers are available without a minor scale.) |
| Part
Numbers |
For front wheel or
transmission signals
780B2-49274 (12v)
780B2-49252 (24v) |
For ECM signals
780F2-48704 (12v)
780F2-49332 (24v) |
|
